Motorola ET1, Integrator Manual

Page: 109 / 184

Administrator Utilities 7 - 9
Disable Remote Authentication
To disable remote authentication:
1.
Touch > MultiUser Administrator .
2.
Touch .
3.
Touch Disable Remote Authentication . The remote authentication feature is disabled immediately.
4.
The ET1 suspends. When resumed, the login screen appears.
Enable Data Separation
Data Separation feature allows each user of the ET1 to have separate isolated data area for installed
application. To enable data separation:
1.
Touch > MultiUser Administrator .
2.
Touch .
3.
Touch Enable Data Separation . The current user is logged out to prepare the data space for each user as
they log in.
Disable Data Separation
To disable data separation:
1.
Touch > MultiUser Administrator .
2.
Touch .
3.
Touch Disable Data Separation . The current user is logged out to restore the system to common data
space for all users.
Delete User Data
To delete user's data:
CAUTION When Remote Authentication is enable, the ET1 searches for the remote server during the login
procedure. If the remote server is not available or the address is incorrect, the user would not be able
to login and an Enterprise reset is required to access the ET1.
NOTE To enable Data Separation, the user must have administrator rights. A message displays at the bottom of
the screen notifying the user.
NOTE To disable Data Separation, the user must have administrator rights. A message displays at the bottom of
the screen notifying the user.
NOTE To delete user data, the user must have administrator rights. A message displays at the bottom of the
screen notifying the user.