Motorola ES400, User Manual

Page: 73 / 212

Phone Network Setup 4 - 5
2.
Select a ring tone for incoming calls from the Ring tone: drop-down list. To hear a sample of the selected ring
tone, tap . Tap to end the ring tone.
3.
Select a keypad tone from the Keypad: drop-down list. This selection determines the tone that sounds when
entering a phone number on the keypad.
Select Short tones or Long tones to specify the duration of the sound when you press a number on the
keypad. Select Off to disable tones.
Security
Enabling a PIN
Tap Start > Settings > Personal > Phone > Security.
To require a PIN when using the phone:
1.
Select the Require PIN when phone is used check box.
2.
Use the dialer keypad to enter a four to eight digit PIN.
3.
Tap Enter to enable the PIN and return to the Security tab.
Changing a PIN
1.
Tap Change PIN.
2.
Use the dialer keypad to enter the current PIN.
3.
Tap Enter.
4.
Use the dialer keypad to enter a new four to eight digit PIN.
5.
Tap Enter.
6.
Reenter the new PIN for confirmation and tap Enter.
7.
Tap OK to confirm the change.
Disabling a PIN
1.
Deselect the Require PIN when phone is used check box.
2.
Use the dialer keypad to enter the current PIN.
NOTE
To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on the host computer to copy the file to
the /Windows/Rings folder on the ES400. Then select the sound from the ring tone list
.
NOTE Turning off sounds saves power and prolongs battery life
.
NOTE Place emergency calls at any time, without requiring a PIN or a SIM card
.
CAUTION If the user enters an incorrect PIN, the message “SIM PIN incorrect: Try again” appears. After three
consecutive incorrect attempts, the SIM card is blocked. The phone does not allow entering a PIN again
and the user must obtain a PIN Unblock Key from the service provider.