Motorola ES400 User Manual Download Page 197

Page: 197 / 212

Appendix D Software Installation

The user can install applications and operating system updates on the ES400 using the following:

•

Microsoft ActiveSync 4.5 or higher

•

Storage Card

•

MSP

•

AirBEAM

•

Image Loader (for updating the operating system).

Refer to the Microsoft Windows Mobile 6 Help file for information on CAB files.

Installation Using ActiveSync

To install an application using ActiveSync:

Connect the ES400 to a host computer using ActiveSync. See

ActiveSync on page 12-11

for more information.

Locate the package file on the host computer.

In ActiveSync on the host computer, open Explorer for the ES400.

Copy the CAB file from the host computer to the \temp directory on the ES400.

On the ES400, navigate to the \temp directory.

Tap on the application CAB file to install the application on the ES400.

Installation Using Storage Card

To install an application using a microSD card:

Copy the package CAB file to a microSD storage card using an appropriate storage card reader.

Install the storage card into the ES400. See

Installing a microSD Card on page 1-2

for more information.

On the ES400, open File Explorer.

Open the Storage Card directory.

Summary of Contents for ES400





















































































































































































































Search results

Summary of Contents for ES400

Reviews:

Related manuals for ES400

Brands by name

Popular brands

Motorola ES400, User Manual

Search results

Summary of Contents for ES400

Reviews:

Related manuals for ES400

Brands by name

Popular brands