Motorola ES400, User Manual

Page: 188 / 212

C - 8 ES400 User Guide
To make a speed dial call:
1.
Press .
2.
From the keypad, tap and hold the speed dial location number assigned to a contact. (To dial a one-digit speed
dial location number, tap and hold the speed dial number. To dial a two-digit speed dial location number, tap the
first digit and then tap and hold the second digit.)
or
From the keypad, tap Speed Dial and tap the speed dial location number of the desired contact in the list.
Figure C-10
Speed Dial Contact List
3.
To stop dialing or end the call, press .
Answering a Call
A dialog box appears on the ES400 when it receives an incoming call. If the phone is set to ring, a ring tone
sounds. Answer or ignore the incoming call.
To answer an incoming call tap Answer on the dialog box or press .
Figure C-11
Incoming Call
To ignore the incoming call tap or press . This sends the caller to voice mail, depending on the service
provider. Otherwise, this presents a busy signal to the calling party.
To end the call press .
Speed Dial
Location Number