manualshive.com logo in svg

Motorola ES400, User Manual, Page: 181 / 212

Share
Download
Motorola ES400 User Manual Download Page 181

Appendix C  Windows Mobile Home Screen 

and Dialer

Introduction

The appendix describes the functionality of the optional Windows Mobile Home screen and Dialer.

Windows Mobile Home Screen

The Windows Mobile Home screen is scrollable and contains a list of application plug-ins and an Information Status 
bar. The Information Status bar highlights the application plug-in that is under it and provides additional information.

Figure C-1    

Windows Mobile Home Screen

To enable the Windows Mobile Home screen:

1.

Tap  

> 

Setting > Home.

2.

On the horizontal scroll, select Items.

3.

In the item list select the Windows Default checkbox. Deselect all other checkboxes.

4.

Tap OK. The Windows Mobile Home screen appears.

Open the Start Menu

Tiles

Status Bar

Today Screen

Tile Bar

Summary of Contents for ES400





















































































































































































































Reviews:

No comments