manualshive.com logo in svg

Motorola DS4208, Product Reference Manual, Page: 100 / 364

Share
Download
Motorola DS4208 Product Reference Manual Download Page 100

5 - 10 DS4208 Digital Scanner Product Reference Guide

Simulated Caps Lock

Enable this to invert upper and lower case characters on the bar code as if the Caps Lock state is enabled on the 
keyboard. This inversion occurs regardless of the keyboard’s Caps Lock state. Note that this only applies to alpha 
characters.

USB CAPS Lock Override

This option applies only to the HID Keyboard Emulation device. Enable this to preserve the case of the data 
regardless of the state of the Caps Lock key. This setting is always enabled for the Japanese, Windows (ASCII) 
keyboard type and can not be disabled.

* 

Disable Simulated Caps Lock

Enable Simulated Caps Lock

Override Caps Lock Key

(Enable)

* 

Do Not Override Caps Lock Key

(Disable)

NOTE

If both Simulated Caps Lock and Caps Lock Override are enabled, Caps Lock Override takes precedence.

Summary of Contents for DS4208













































































































































































































































































































































































Reviews:

No comments