Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 344 / 517

Base Radio - Indicators and Connectors Chapter 10: Base Radio
Base Radio - Indicators and Connectors
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Table 10-1 Base Radio - LED Indicators
# LED/Port name
Type
Controlled by
Indication
LED 1 Tx Red/Green SW BR keying:
•
OFF: BR is not keyed
•
AMBER: BR is keyed without
service
•
GREEN: BR is keyed
LED 2 Aux Red/Green SW
•
OFF: No alarms
•
AMBER: not used
•
RED: not used
LED 3 Status
Red/Green SW Red LED will
turn on before
SW change any
indication
BR status:
•
OFF: Status unknown, power off
•
GREEN: BRC main application
is running
•
AMBER: Waiting for SWDL –
this is where the BR will wait if
no Site Controller is present
•
RED: SW not started, power on
LED 4 BR Alarm Red/Green SW
•
OFF: No alarms
•
AMBER: BR minor alarm: PA,
Exciter, RX, BRC Reduced
performance
•
RED: BR failed: PA, Exciter,
RX, BRC
LED5
SC 1 Green HW, Enet IC
•
OFF: Ethernet link not present
•
GREEN: Ethernet link present
LED6 SC 1 Yellow HW, Enet IC
•
OFF: Ethernet activity not present
•
YELLOW: Ethernet activity
present
LED7 SC 2 Green HW, Enet IC
•
OFF: Ethernet link not present
•
GREEN: Ethernet link present
LED8 SC 2 Yellow HW, Enet IC
•
OFF: Ethernet activity not present
•
YELLOW: Ethernet activity
present
10-8
6802800U74-N September 2009