manualshive.com logo in svg

Motorola DigitalDNA ColdFire MCF5272, User Manual

The user manual for the high-performance Motorola DigitalDNA ColdFire MCF5272 can be easily downloaded for free from our website. This comprehensive manual provides step-by-step instructions and detailed information on operating this advanced product. Unlock the full potential of your MCF5272 through our hassle-free online manual download.

Share
Download
background image

12-6

MCF5272 User’s Manual

 

Module Operation  

Table 12-1. USB Device Requests 

Device Request

USB Request Processor Action

clear_feature

Request processor clears the feature specified by the feature selector parameter. Currently, 
remote wakeup and endpoint halt are the only features defined by the USB specification. If 
the feature to be cleared is remote wakeup, the USB block disables the remote wakeup 
functionality. If the feature to be cleared is endpoint halt, the request processor activates the 
selected endpoint. The user is notified when the remote wakeup is disabled or an endpoint 
halt is cleared.

get_configuration

Returns the current configuration as set by a previous 

SET

_

CONFIGURATION

 request. No user 

notification is provided. No user action required.

get_descriptor

Reads the specified device or configuration descriptor from the configuration RAM and 
transfers it to the host. Requests for a configuration descriptor returns all of the descriptors 
associated with a given configuration including interface, endpoint, and class-specific 
descriptors. This request fails if the configuration RAM has not been initialized. No user 
notification is provided.
The optional requests for string descriptors are not handled automatically by the request 
processor. 

GET

_

DESCRIPTOR

 requests for string descriptors are passed to the user as a 

vendor specific request. The string descriptors must be stored in external memory and not 
the configuration RAM.

get_interface

Returns the selected alternate setting for the specified interface. No user notification is 
provided.

get_status

Returns the current status of the specified device, endpoint or interface. No user notification 
is provided, no user action required.

set_address

Loads the specified address into USBFAR. The control logic begins responding to the new 
address once the status stage of the request completes successfully. No user notification is 
provided unless debug mode is enabled.

set_configuration

Reads the configuration RAM. If the configuration is cleared, the USB module is placed into 
the unconfigured state. If a valid configuration is selected, the appropriate endpoint 
controllers are activated. An invalid configuration number or error in the configuration 
descriptor causes the USB module to return a STALL response to the host. The user is 
notified when this request completes successfully and must initialize the active endpoint 
controllers.

set_descriptor

Not supported. Returns request error.

set_feature

Sets the specified feature. Remote wakeup and endpoint halt are the only features defined in 
the USB Specification, Revision 1.0. If the specified feature is remote wakeup, the USB 
enables the remote wakeup functionality. If the specified feature is endpoint halt, the USB 
request processor halts the selected endpoint. A halted endpoint returns a STALL response 
to any requests.

set_interface

Allows the host to select an alternate setting for the specified interface. If a valid alternate 
setting is selected, the appropriate endpoint controllers are activated. The user is notified 
upon successful completion of this request and must reinitialize the affected endpoint 
controllers.
NOTE: The user must read the descriptor structure to determine which endpoints correspond 
to a given interface.

sync_frame

Passed to the user as a vendor specific request.

Summary of Contents for DigitalDNA ColdFire MCF5272







































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DigitalDNA ColdFire MCF5272

F5 WANJet 500 Quick Start Card preview
WANJet 500
Brand: F5 Pages: 2
F5 ARX-500 Hardware Reference Manual preview
ARX-500
Brand: F5 Pages: 90
F5 ARX-4000 Parts Replacement Manual preview
ARX-4000
Brand: F5 Pages: 47
F5 i5000 Series Platform Manual preview
i5000 Series
Brand: F5 Pages: 72
Telit Wireless Solutions HE922-3GR Hardware User'S Manual preview
HE922-3GR
Brand: Telit Wireless Solutions Pages: 113
Lattice Semiconductor sysCLOCK ECP5 Usage Manual preview
sysCLOCK ECP5
Brand: Lattice Semiconductor Pages: 43
Paradyne ACCULINK 3161 CSU Quick Reference Manual preview
ACCULINK 3161 CSU
Brand: Paradyne Pages: 19
Microtek MiniLink Operation Manual preview
MiniLink
Brand: Microtek Pages: 25
Delta AH10EN-5A Series Operation Manual preview
AH10EN-5A Series
Brand: Delta Pages: 132
ADTRAN DUAL Nx56/64 1200142L1# User Manual preview
DUAL Nx56/64 1200142L1#
Brand: ADTRAN Pages: 48
EMC VNX5300 Block Hardware Information Manual preview
VNX5300 Block
Brand: EMC Pages: 88
Promise Technology Pegasus R4 Product Manual preview
Pegasus R4
Brand: Promise Technology Pages: 148
Quatech SSPX-100 User Manual preview
SSPX-100
Brand: Quatech Pages: 5
XMOS MultiUART Quick Start Manual preview
MultiUART
Brand: XMOS Pages: 8
Rosewill RC-611 User Manual preview
RC-611
Brand: Rosewill Pages: 5
Siklu EtherHaul 500 Installation Manual preview
EtherHaul 500
Brand: Siklu Pages: 52
DataDirect Networks EF2915 Series User Manual preview
EF2915 Series
Brand: DataDirect Networks Pages: 97
INFRALAN SECURITY ILR-16POE Quick Manual preview
ILR-16POE
Brand: INFRALAN SECURITY Pages: 15

Brands by name

Popular brands

Load more brands