SHAW HD BOX
INSTALLATION INSTRUCTIONS
(Approx. Hardware Setup Time: 10-15 Minutes)
STEP 1
|
DO YOU HAVE EVERYTHING?
The following components are included in the package that your HD box came in:
Cable Cord (Coax)
Power Pack
HDMI Cable
IR Re Tether Cord
(Optional Use)
Shaw Remote
Motorola HD Box
STEP 2
|
TIME TO HOOK UP YOUR NEW HARDWARE.
B. Find a location to put your new hardware that will allow
it to breathe.
C. Screw one end of the
included white cable cord
(with silver ends) in to your
wall cable outlet and the
other end in to CABLE IN
on the back of the HD box.
For an optimal viewing
experience, we recommend
using the included cable
cord instead of any others
that you might have around.
A. Your serial number, “Host SN,” is located on the back
of the HD box (next to the number 3) and starts with
the letter “M”. Alternatively, you can fi nd the serial
number on the white sticker labeled “S/N” on the HD
box packaging.
Before you hook up your HD box, write your serial
number below. You will need it when you contact us to
activate your new hardware.
Serial Number:
Wall Outlet
Cable In
Cable Out
