41
Settings
5. Press
E
, scroll the left and right navigation keys to select a volume level
(1 - 5 and
Ringer Off
).
6. Press the left
C
key to confirm or right
C
key to return to the previous
menu.
9.6.2 Flash time
Depending on your country and network operator, your phone has the flash
time set to
Long
. It is unlikely that you need to change this setting unless
advised to do so.
1. Press the left
C
key. Scroll
U
to
Settings
.
2. Press the left
C
key, scroll
E
to select
Base settings
.
3. Press the left
C
key, scroll
E
to select
Flash time
.
4. Press the left
C
key, press
U
or
E
to select
Short
,
Medium
or
Long
.
5. Press the left
C
key to confirm.
9.6.3 Dial mode
Your phone is set to tone dialing. You should only need to change this if
connected to an older type of switchboard / PBX which requires pulse dialing.
1. Press the left
C
key, scroll
U
to
Settings
.
2. Press the left
C
key, scroll
E
to select
Base settings
.
3. Press the left
C
key, scroll
E
to select
Dial mode
.
4. Press the left
C
key. Then press
U
or
E
to select
Tone
or
Pulse
.
5. Press the left
C
key to confirm.
9.6.4 Area code
The area code must be 3 digits long.
1. Press the left
C
key, scroll
U
to
Settings
.
2. Press the left
C
key, scroll
E
to select
Base settings
.
3. Press the left
C
key, scroll
E
to select
Area code
.
4. Press the left
C
key, enter or edit the area code.
5. Press the left
C
key to confirm.
9.6.5 PBX code
If you are connected to a switchboard, you may be required to enter a PBX
code (e.g. '9') before you dial the number. Your phone will automatically add
this code in front of each number you dial.
1. Press the left
C
key, scroll
U
to
Settings
.
2. Press the left
C
key, scroll
E
to select
Base settings
.
3. Press the left
C
key, scroll
E
to select
PBX code
.
4. Press the left
C
key, enter the code.
5. Press the left
C
key to confirm.