16
Parent Unit Menu Options
4. If an alarm time is selected, the Parent Unit will beep for about
45 seconds after every 6, 4 or 2 hour period.
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is highlighted,
and the del/ add/
view/
scan menu will pop up.
3. Press the
+
UP button or
-
DOWN button to select add, and
press the
O
button to confirm.
4. Camera
/
/
/
will pop up. Press the
+
UP button or
-
DOWN button to select the desired Camera, and press the
O
button to start searching for a camera unit.
Note:
If a camera is currently paired with the Parent Unit, its
camera location (with a * against it) cannot be selected for a new
registration.
5. Press and hold the
PAIR
button on the underside of the Baby
Unit until the Parent Unit finds the camera, beeps and
PAIR OK
appears on the screen. The video from the camera will then
appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a camera
1. Press the
M
button and the menu bar will pop up.
2. Press the
<
LEFT button or
>
RIGHT button until is
highlighted, and the del/ add/
view/
scan menu will
pop up.
3. Press the
+
UP button or
-
DOWN button to select
add, and
press the
O
button to confirm.
4. Camera
/
/
/
will pop up. Press the
+
UP button or
-
DOWN button to select the desired Camera, and press the
O
button to view the picture from that camera.
Note:
Only camera locations with a * can be selected.
