Motorola CLK, User Manual

Page: 25 / 44

English
27
GETTING ST
ARTED
Selecting a Channel
This feature is the first feature on the radio Menu. The
channel numbers that can be supported by the display
are Channel 1 to 16.
To change channels, press the Volume Control
Button (+/–) .
To select a channel, press the PTT button or wait until
the display returns to the Home screen. The LED
display shows the new Channel number.
Starting and Stopping Scan
Scan allows you to monitor other channels to detect
conversations. When the radio detects a transmission,
it stops scanning and goes to the active channel. This
allows you to listen and talk to people in that channel
without having to change channel.
To activate the Scan feature, press the MENU button
until the Scan icon displays. Press the Volume
Control Button (+/–) to turn on or off the Scan
feature.
The radio only scans the channels which are
programmed in the Scan List for each channel
The radio does not automatically exit Scan mode after
the Menu timer expires. To exit Scan mode, press the
PTT button.
To pause Scan and return to the menu, press the
MENU button.
Nuisance Channel Delete
Nuisance Channel Delete allows you to temporarily
remove channels from the Scan List. This feature is
useful when irrelevant conversations on a ‘nuisance’
channel ties up the radio’s scanning feature.
To delete a channel from the Scan List:
• Start Scan mode by pressing the MENU button
then, navigate to the Scan feature and enable
scan by using the
Volume Control Button (+/–) .
• Wait until the radio stops receiving at the channel
you wish to eliminate. Long press the
MON
button to delete the channel.
The channel will not be scanned again until you exit
the Scan mode by short pressing the
PTT button or by
turning OFF the radio and back ON.