Motorola CLEARTONE CM5000, User Manual

Page: 63 / 212

55
Th
e Me
nu
Scan Lists
1. From the main menu, select More > Group Setup > Scan
> Scan Lists
.
2. Scroll to the required scan list. Press View to see the
groups used in the scan list. Press Back to return to the
previous display.
3. To edit/view the contents of a scan list, press the Menu
button
.
4. In the List Optns sub-menu, scroll to the required option
and press
Select .
• Rename the active scan list. Enter a new name (alias)
and press Ok . The display shows the new setting.
• Check the capacity of the active scan list (number of
groups stored in the list).
• To Clear all groups from the selected scan list, press
Yes . You will be prompted to remove all groups from
the selected scan list.
• Add a group to the selected scan list. Every added
group (including a favourite group) comes with its folder,
its name or number, and its priority (if pre-programmed).
> To select a folder, scroll through the folder list. The
list does not show folders whose groups are fully
used in the selected scan list. Press
Ok to select a
folder.
> To select a group, scroll through the group list within
the selected folder. The list shows groups that are not
in the selected scan list. Press
Ok
.
> To set a priority to a group, scroll through the priority
list: high, medium, or low.
A call from a high priority group will interrupt an on-
going call with a medium and low priority.
A call from a medium priority group will interrupt an
on-going call with a low priority.
A call from a low priority group will not interrupt any
on-going call.