Motorola CLEARTONE CM5000, User Manual

Page: 60 / 212

52
Screen Saver
1. From the main menu, select Setup > Display
>
Screen Saver .
2. Press Change . Press Change again and select the screen
saver setting: Auto or Disabled . If set to Auto the screen
saver turns on after 30 seconds of inactivity.
3. Scroll to Text . Press Change . Type/edit the screen saver
text using the keypad. (For details on text editor use, see
“Writing Text” on page 71).
4. Press Done to exit.
Setting the Backlight
You can set the function and brightness of the backlight.
To enter your backlight settings sub-menu:
1. From the main menu, select Setup > Display
>
Backlight .
2. Press Change .
3. Select required setting.
• Function — your CM5000 has 4 backlight settings:
Automatic — Any key press turns the backlight on.
The backlight remains on until the pre-programmed
timer runs out.
Disable — The backlight feature is disabled.
Semi-automatic — Per default the backlights are
switched off. You can switch the backlights on by
pressing the Enter key. After a few seconds (config-
ured by your Service Provider) the backlights switch
off automatically.
Manual — The backlight remains on. To turn the back-
light on/off press the Clear key.
• Brightness — you can set the brightness to High or Low.