Motorola CLEARTONE CM5000, User Manual

Page: 29 / 212

21
DMO Group
Call
Direct Mode Operation - DMO
DMO Group Call
In DMO, the CM5000 can be used without your Service
Provider’s infrastructure. Direct Mode (DMO) allows
communication with other terminals also operating in Direct
Mode, which are on the same frequency and talkgroup as
your CM5000.
You can receive a call:
• From the selected talkgroup
• From other users within talkback range (if configured by
your Service Provider). This is called an InterMNI (Mobile
Network identity) call.
• From an open group. (An open group is a super-group to
which all DMO groups belong.)
When you start a call, the members of the selected talkgroup
who have their units turned on, and are within the group
subscriber identity (as configured by the Service Provider),
will receive the transmission.
If Transmit Inhibit is activated while the terminal is set to
DMO, the PTT is disabled. You can only listen. For detailed
information on Transmit Inhibit, see page 20. DMO Talkgroup
selection is allowed when Transmit Inhibit is activated.
“My Groups” Folder
You can organise your favourite groups into one folder called
“My Groups”.
Adding/Deleting Groups from the My Groups Folder
For more information, see “My Groups” on page 56.
Selecting a Group
See “Selecting a Group” on page 18.