Issue 1.1 April 2006
Page 139
14.3 Software/Features
The variant operates in the same way as the basic Canopy 150/300 Mb BH product and is
released initially with the feature set of the Canopy 150/300 Mb BH-C product. The areas
where the functionality is modified are:
14.3.1 Status Page
The link loss calculation presented on the Status Page on the management interface has to
be modified to allow for the increased antenna gains at each end of the link. The
manufacturing process of the Canopy 150/300 Mb BH-C configures the standard hardware of
the unit for use with external antennas. The installer is prompted, as part of the installation
process, to enter the gain of the external antenna(s) and cable losses at each end of the link.
Peer-to-peer messaging is used to pass the effective antenna gain to each end of the link so
that the link loss calculations can be correctly computed.
Figure 95: Canopy 150/300 Mb BH-C Status Page
14.3.2 Configuration Pages
The amended Configuration Web page is shown below as Figure 96.
Summary of Contents for Canopy 150 Mbps Backhaul
Page 1: ...Canopy 150 300 Mbps Backhaul User Guide BH150 300 UG en Issue 1 1 April 2006 ...
Page 25: ...Issue 1 1 April 2006 Page 24 Figure 5 Canopy 150 300 PIDU Power Input ...
Page 97: ...Issue 1 1 April 2006 Page 96 Figure 59 Spectrum Management Help Page ...
Page 162: ...Issue 1 1 April 2006 Page 161 Figure A8 Surge Arrestor ALPU ORT Connection Illustration ...
