4 - 22 CA50/UCA Client & Server Developer & User Guide
UCA Sys Info
The UCA Sys Info application can be used to test a variety of situations.
•
Mem screen: If the system is sluggish, the memory screen displays whether or not
resources are low.
•
Batt screens: Three battery screens display battery status including power source,
temperature and instantaneous voltage and current draws. If charging issues develop,
these screens display an over temperature condition.
•
IP screen: Displays the IP of the network adaptors including USB if the cable is attached.
The USB IP is 192.168.55.101. If the WLAN device has an IP of 0.0.0.0, it is not connected
to an AP. If there is no IP address at all for the WLAN adaptor, there is a problem
communicating with the radio.
•
MAC screen: Displays the MAC address of the network adaptors. The USB MAC is all
zeros. The WLAN adaptor MAC is in the format 00:15:70:XX:XX:XX. If there is no MAC for
the WLAN adaptor, there is a problem communicating with the radio.
•
IMPORTANT
Note: The CA50 must be used for RF site surveys that require optimization of CA50
voice communications. For these sites the CA50 is the only acceptable survey tool.
Other mobile devices (such as an MC50) do not produce an equivalent signal strength
indication as displayed on the CA50.
•
wlan screen RF Site Survey Tool: Displays the active profile and monitors RF signal
strength. The signal strength, displaying the RSSI value in dB, is updated every few
seconds. A user can walk from area to area with the device and the display updates
show the coverage in different areas.
Table 4-6
CA Menu Options (Continued)
Menu
Description
Summary of Contents for CA50
