Motorola CA50 Developer & User Manual Download Page 5 | Manualshive

Page: 5 / 542

background image

iii

Warranty

Mobile Device

The CA50 is warranted against defects in workmanship and materials for a period of one year (12 months)
from date of shipment, provided the product remains unmodified and is operated under normal and proper
conditions.

Accessories

CA50 accessories, such as cables and power supplies, carry a warranty term of ninety (90) days from the date
of shipment.

CA50 Server Software

The CA50 Server Software ships with Motorola’s standard 90-day software warranty. During the warranty
period, Motorola will replace damaged or defective media. Telephone and e-mail access are also provided for
the sole purpose of reporting a non-conformance issue, and for Motorola to verify the existence of the issue
and determination of the conditions under which the issue may recur.

For enhanced support over the standard warranty, including full access to technical support resources and
rights to download entitled software releases, Motorola recommends purchasing a CA50 Server Software
Support agreement.

To maintain MSP support beyond the 90-day warranty period, Motorola recommends purchasing an MSP
Software Support agreement. Note: MSP Software Support agreements must be purchased separately or in
addition to CA50 Server Software Support agreements.

«
...
3
4
5
6
7
...
»

Summary of Contents for CA50































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CA50

QUICK CHECK 890

Brand: Hand Held Products Pages: 40

Brand: Code Pages: 2

Brand: FingerTec Pages: 2

Brand: Magtek Pages: 18

Orpak M09680B136

Brand: Gasboy Pages: 12

Brand: Datalogic Pages: 558

Brand: Datecs Pages: 18

Brand: Wise Pages: 10

Brand: StarTech.com Pages: 2

Brand: Tecknet Pages: 4

Brand: Godex Pages: 40

Brand: Accuris Pages: 38

Brand: ARKSCAN Pages: 17

Brand: ARKSCAN Pages: 17

Brand: Pocketbook Pages: 70

Imatumi Media Reader

Brand: LaCie Pages: 2

Brand: RIOTEC Pages: 2

Brand: RIOTEC Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands