manualshive.com logo in svg

Motorola CA50, Developer & User Manual, Page: 401 / 542

Share
Download
Motorola CA50 Developer & User Manual Download Page 401

Maintenance, Troubleshooting and Error Messages 14 - 33

Console Status Data

62331

An exception occurred while attempting to update console user info. Refer to the NT Event log for more 
details.

62361

A data layer exception occurred while setting a console user's pin.

62362

The specified user was not found in the database.

62363

Database error occurred while attempting to set a console user's pin.

62391

Import of users to CSV failed.

62392

A data layer exception occurred while attempting to import user data to CSV format.

62393

An exception occurred while attempting to import user data to CSV format. Refer to the NT Event Log 
for more details.

Table 14-22    

Console Users Errors (Continued)

Error Code

Description

Table 14-23    

Console Status Data Errors

Error Code

Description

72511

Exception occurred while checking if DB maintenance is due. Refer to the NT Event Log for more 
details.

72521

Exception occurred while getting last DB maintenance timestamp. Refer to the NT Event Log for more 
details.

72531

Exception occurred while adding last DB maintenance record. Refer to the NT Event Log for more 
details.

72541

Exception occurred while updating last DB maintenance. Refer to the NT Event Log for more details.

72551

Exception occurred while removing record of last DB maintenance. Refer to the NT Event Log for more 
details.

72571

Exception occurred while getting all DB maintenance records. Refer to the NT Event Log for more 
details.

Summary of Contents for CA50































































































































































































































































































































































































































































































































































Reviews:

No comments