Home
/
Motorola
/
CA50
/
Developer & User Manual

Motorola CA50, Developer & User Manual, Page: 351 / 542

Share

Page: 351 / 542

Motorola CA50 Developer & User Manual Download Page 351

Chapter 12 Staging and Deploying CA50s

Overview

To stage and deploy CA50s at a customer site, use MSP Stage, which establishes communication with the RF
infrastructure and initial connectivity to the UCA server.

To upgrade the CA50 OS, UCA client application or other software components use MSP Provision functionality.

One copy of the MSP 3.x server software (stage and provision functionality only) and its license certificate is
provided free with the purchase of a UCA server software license.

•

MSP 3.x license fees, per CA50, are free of charge.

•

CA50s are automatically registered with an MSP server upon initial staging (automated process, no user
intervention required).

•

CA50s are automatically device licensed/enabled for stage and provision capabilities out-of-box
(automated process, no user intervention required).

•

Number of CA50s supported per MSP server - no software constraint/limitations are imposed.

NOTE

If desired, an MSP Software Support (extended warranty) agreement must be purchased separately and
in addition to any desired CA50 Server Software Support (extended warranty) agreement.

NOTE

1. For a complete checklist outlining all the development and deployment activities required to implement

a CA50 solution, see the

Development and Deployment Checklist on page 2-1

2. For a table listing the most commonly requested topics within this manual, see the Quick Startup Guide
on the last page of the manual.

«
...
349
350
351
352
353
...
»

Summary of Contents for CA50































































































































































































































































































































































































































































































































































Reviews:

No comments