Motorola CA50 Developer & User Manual Download Page 321

Page: 321 / 542

UCA Server Optional APIs 11 - 19

GroupInfo Class Members

RemoveGroup

This method removes a group from the UCA system. The groups are removed from the B_Groups table.

int RemoveGroup(string sStoreNumber, string sGroupToken, string ipAddr, string sUser,

ref UCAWebServiceStatus WSStatus)

Parameters

sStoreNumber

Store number.

sGroupToken

Group ID. Identifier for the Group.

ipAddr

IP address of source machine (optional - used for logging).

Pass "" when address logging is not required.

sUser

UserID of user making WS call (optional - used for logging).

Pass "" when user logging is not required.

WSStatus

UCAWebServiceStatus class describes the status of the call.

Return Values

Returns 1 when successful.

Remarks

Any errors are logged to the NT Event log.

Table 11-6

GroupInfo Class Members

Class Member

Description

GroupToken

Group ID. Must be unique.

GroupName

Group name for display purposes.

GroupExtID Group

number

IsSelectable

Is this group selectable by the user at login?

Summary of Contents for CA50































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CA50

Reviews:

Related manuals for CA50

Brands by name

Popular brands

Motorola CA50, Developer & User Manual

Search results

Summary of Contents for CA50

Reviews:

Related manuals for CA50

Brands by name

Popular brands