manualshive.com logo in svg

Motorola CA50, Developer & User Manual, Page: 206 / 542

Share
Download
Motorola CA50 Developer & User Manual Download Page 206

8 - 6

CA50/UCA Client & Server Developer & User Guide

4.

The Default Menu option appears initially. To choose an existing menu, click the Choose Menu radio button. 
Click Browse to select an existing menu (an XML file containing menu information).

Figure 8-5    

Configure Profiles

Phone Settings

The Phone element specifies the settings necessary to configure the phone component. This includes the caller ID 
value (sent to the gateway) and the password used to register the assigned extension with the PBX. 

Currently, the only configurable value is Enable="Y" to allow phone usage, or Enable="N" to not allow phone 
usage. The remaining parameters are disabled. They are populated from the database before the profile is sent 
from the UCA server to the device.

Figure 8-6    

Phone Settings

Summary of Contents for CA50































































































































































































































































































































































































































































































































































Reviews:

No comments