manualshive.com logo in svg

Motorola CA50, Developer & User Manual, Page: 180 / 542

Share
Download
Motorola CA50 Developer & User Manual Download Page 180

7 - 12 CA50/UCA Client & Server Developer & User Guide

10.

DebugLog
The DebugLog element controls what types of log messages are recorded in the local <xx debug> log file (for 
more information, see 

page 14-8

). Logging can be enabled for one or more categories and each can be set to 

a different level. The levels, in order of no messages to the most messages, are "Off" (no log messages), "Info" 
(device and server IP address), "Error" (information messages and errors), "Warn" (information, error and 
warning messages) and "Debug" (all messages). Note that there are log messages for start up logic even if all 
categories are set to “Off.” The UCAClient.reg file needs to be modified to turn off startup logging. The 
“LoggingEnabled” parameter under the [HKEY_LOCAL_MACHINE\SOFTWARE\Motorola\UCAClient\Params] 
key must be set to zero to completely disable logging.

11.

MenuStates
The MenuStates element controls what default soft key labels should be displayed and what their default 
actions should be for various states of the CA50. The values for the State attributes are discussed in 

Static 

Menus Section on page 7-13

 as they are very closely related to menu entries.

Summary of Contents for CA50































































































































































































































































































































































































































































































































































Reviews:

No comments