Motorola CA50, Developer & User Manual, Page: 179 / 542

XML Profile for Configuration 7 - 11
•
AppAlertCallActive, alert has three configurable options:
• AllowTone
• AllowVisibleIndicator
• AllowVibrateIndicator
•
All three attributes are Boolean. Permissible values are "Y" or "N".
Visible Indicator attribute - possible values:
•
RedSlowBlink - Red LED blinks once every second.
•
RedMedBlink - Red LED blinks once every 1/2 second.
•
RedFastBlink - Red LED blinks once every 1/10 second.
•
RedOn - Red LED remains on.
•
GreenSlowBlink - Green LED blinks once every second.
•
GreenMedBlink - Green LED blinks once every 1/2 second.
•
GreenFastBlink - Green LED blinks once every 1/10 second.
•
GreenOn - Green LED remains on.
•
AmberSlowBlink - Amber LED blinks once every second.
•
AmberMedBlink - Amber LED blinks once every 1/2 second.
•
AmberFastBlink - Amber LED blinks once every 1/10 second.
•
AmberOn - Amber LED remains on.
Vibrate Indicator attribute - possible values:
•
SlowVibrate - Device vibrates once every second.
•
MedVibrate - Device vibrates once every 1/2 second.
•
FastVibrate - Device vibrates once every 1/10 second.
•
VibrateOn - Devices vibrates.
9.
MetricsLog
The MetricsLog element controls which possible metrics related activities are sent to the server for logging and
to which server they are sent. Include the activities to be logged in the options list. Valid settings are "PTT"
(Walkie- Talkie), "Device" (information specific to this device), "OutgoingCall" (information on calls to others)
and "IncomingCall" (information on calls received). The amount of time between sends of this information can
be modified by changing the CollectionInterval="60" statement. The value is in minutes.
The CollectionIntervall is only for device and PTT metrics. The other metrics types are asynchronous and are
sent up when either an outgoing or incoming phone call disconnects.
NOTE
Attributes defined for NotifNoCall, NotifCallActive, and AppAlertCallActive apply only when the
client setting Enable Notification is set to Yes. If this attribute is set to No, the notification is not
sent to the device and none of the defined attributes will apply
.