6881040B65 August 20, 2002 35
Level
3
Service Manual Troubleshooting
Troubleshooting
Manual Test Mode
Motorola PF 0C35 telephones are equipped with a manual test mode capability.
This allows service personnel to verify functionality and perform fault isolation by
entering keypad commands.
To enter the manual test command mode, a GSM / DCS test SIM must be used.
1.
Press
O
to turn the phone OFF.
2.
Remove the battery as described in the procedures.
3.
Remove the customer’s SIM card from the phone as described in the
procedures.
4.
Insert the test SIM into the SIM slot.
5.
Replace the battery as described in the procedures.
6.
Press
O
to turn the phone ON.
Manual Test Mode Commands
Table 2. Manual Test Commands
Key Sequence
Test Function/Name
Remarks
<Menu>048263* Enter manual test mode
"End" Key
Exit manual test mode
54*
Suspend
Required for all Test Mode Operations
0*0*0
Select tone 0
0*0*1
Select tone 1
0*0*2
Select tone 2
0*0*3
Select tone 3
0*0*4
Select tone 4
0*0*5
Select tone 5
0*0*6
Select tone 6
0*0*7
Select tone 7
0*0*8
Select tone 8
0*0*9
Select tone 9
0*0*124
Select tone 1 KHz
0*0*125
Select tone 2 KHz
0*0*126
Select tone 3 KHz
0*0*127
Select tone 4 KHz
0*1*X
Disable tone X
3*0*1
Enable vibrator
3*0*0
Disable vibrator
4*3*1
Enable speech coder full rate
Audio loopback
4*3*0
Disable speech coder full rate
4*4*1
Enable speech coder enhanced full rate
Summary of Contents for C330
