BSR 2000 Installation Guide
A-2
MGBI
526359-001
Electrical
■
Voltage: 100-240 VAC
■
Current: 2.0 (for 100-120 VAC), 1.0 (for 200-240 VAC)
■
Frequency: 50/60 Hz
Environmental
■
Operating temperature: 32° to 104° F (0° to 40° C)
■
Nonoperating temperature: -40° to 158° F (-13 to 70° C)
■
Operating humidity: 10-80 %, non-condensing
■
Nonoperating humidity, 5-95 %, non-condensing
Network Interfaces
■
Two Gigabit Ethernet SFP ports capable of accommodating either copper-based
or fiber-based SFP modules
■
Four shielded STP (RJ-45 connector) 10/100-Mbps Ethernet ports
■
One additional shielded STP (RJ-45 connector) 10/100 BASE-T port for
redundancy support
SFP Module Specifications
This section provides specifications for the SFP modules.
Table A-1 1000BASE-SX Multi-Mode Fiber SFP Specifications
Parameter
Value
Transmitter Type
Shortwave laser, 850 nm
Range
550 m
Data Rate (typical)
1.250 Gbps
Connector
Duplex LC
Regulatory
Class 1 devices per FDA/CDRH and
IEC-825-1 laser safety regulations
