BSR 2000 Installation Guide
2-2
MGBI
526359-001
Preinstallation Tasks
Preinstallation tasks include:
■
Confirming that you have the accessories to perform the installation procedures.
■
Obtaining the items you need to complete the installation procedures.
Installation Accessories
In addition to this document and the product release notes, the BSR 2000™ shipment
includes the following items:
■
Two rack-mounting brackets
■
Eight flathead #10-32 x 7/16 Phillips screws
■
One 8-ft. (2.4-m) US power cord
■
One 8-ft. (2.4-m) country-specific power cord (if required)
■
Four rubber feet for desktop installation
■
One CD-ROM containing online customer documentation
■
Release Notes
Required Tools and Equipment
To perform the rack-mount or desktop installation procedures, you need the following
items. Motorola does not provide these items; you must obtain them yourself.
■
A #2 Phillips screwdriver (for rack-mount installations only)
■
A terminal or PC with terminal emulation software
■
A shielded RS-232 crossover cable with a female DB-9 pin connector and a
connector compatible with the RS-232 port on the terminal or PC
■
Ethernet patch cables with male RJ-45 connectors for the 10/100 Ethernet ports
■
Ethernet patch cables with either male LC connectors or male RJ-45 connectors
(depending on whether the SFP module is copper-based or fiber-based) for the
Gigabit Ethernet ports
■
Coaxial cable to connect the BSR 2000 to the wireless port
■
Coaxial cables for the upstream and downstream connections
■
Antistatic wrist strap or antistatic foot strap
■
Hardware (mounting screws, threaded clips, etc.) to secure the BSR 2000 in an
equipment rack
