Motorola BSR 2000, Configuration And Management Manual

Page: 28 / 650

BSR 2000 Configuration and Management Guide Release 1.0
xxviii MGBI 526360-001-00 Rev. B
■
BSR 2000 Release Notes
These documents provide information about features not described or incorrectly
documented in the main documentation set; known problems and anomalies;
product limitations; and problem resolutions.
■
BSR 2000 SNMP MIB Reference Guide
This document describes the Simple Network Management Protocol (SNMP)
MIBs; provides information that describes standard and proprietary MIB support;
describes how to walk the MIBs and how to compile and load the SNMP MIBs. It
also provides task examples.
Conventions
This document uses the conventions in the following table:
Convention Example Explanation
angle brackets < > ping < ip-address >
ping 54.89.145.71
Arguments in italic and enclosed by angle
brackets must be replaced by the text the
argument represents. In the example,
54.89.345.71 replaces < ip-address >. When
entering the argument, do not type the angle
brackets.
bar brackets [ ] disable [ level ] Bar brackets enclose optional arguments. The
example indicates you can use the
disable
command with or without specifying a level .
Some commands accept more than one
optional argument. When entering the
argument, do not type the bar brackets.
bold text cable relay-agent-option Boldface text must be typed exactly as it
appears.
brace brackets {} page { on | off } Brace brackets enclose required text. The
example indicates you must enter either
on or
off after page . The system accepts the
command with only one of the parameters.
When entering the text, do not type the brace
brackets.
italic text boot system < filename > Italic type indicates variables for which you
supply values in command syntax descriptions.
It also indicates file names, directory names,
document titles, or emphasized text.