Motorola BSR 2000, Configuration And Management Manual

Page: 184 / 650

BSR 2000 Configuration and Management Guide Release 1.0
5-20 MGBI 526360-001-00 Rev. B
loopback clears the loopback interface counters.
1-64
is the loopback interface number.
gigaether clears the Gigabit Ethernet interface counters.
X
is 0.
Y
identifies the port number.
Clearing IP Routes
Use the clear ip route command in Privileged EXEC mode to clear one or more IP
routes from the IP routing table:
MOT
#
clear ip route { * | <
A.B.C.D
> | <
A.B.C.D
> <
A.B.C.D
>}
where:
* deletes all routes.
A.B.C.D
the network or subnetwork address.
A.B.C.D
the associated IP address of the removed routes.
Clearing the ARP Cache
Use the clear arp-cache command in Privileged EXEC mode to clear all dynamic
entries from the ARP cache or a single ARP entry on the BSR such as an ARP entry
from a CM’s Customer Premises Equipment (CPE):
MOT #
clear arp-cache [<
A.B.C.D
>]
where:
A.B.C.D
is the IP address for ARP table entry to be cleared.
Clearing IP Traffic
Use the clear ip traffic command in Privileged EXEC mode to reset the IP traffic
statistics counters to zero:
MOT #
clear ip traffic
Clearing DNS Entries
Use the clear host command in Privileged EXEC mode to delete DNS host entries
from the
host-name-and-address cache
:
MOT #
clear host {<
Hostname
> | * }