User’s Guide
BRAVO PLUS
A
®
2
INTRODUCTION
Congratulations on your purchase of a Motorola BRAVO
PLUS numeric display pager. This compact pager has
been designed with simple-to-use operating buttons, rug-
ged housing, and an easy-to-read display.
The BRAVO PLUS pager fits easily in your pocket or
purse, or can be worn on your belt.
The BRAVO PLUS pager offers a number of features. We
encourage you to read this instruction manual carefully to
obtain the full benefits from your BRAVO PLUS pager.
CONTROLS
Read Button (
R
) – Used to read messages and to acti-
vate pager functions. Also used to scroll through the hours
and minutes for time setting.
Menu Button (
F
) – Used to scroll through the pager
menus and set the time of day.
BRAVO PLUS
Menu (
F
)
Button
Alert
Lamp
Read (
R
)
Button
On/Off
Switch
#$%
Side
View
Switch
3
On/Off Switch – This three-position slide switch is used to
turn the pager on and off, acts as a master reset button,
and activates the backlight.
Alert Lamp – Flashes to give a visual indication when a
message is received.
TURNING THE PAGER ON
SILENT Mode: Slide the On/Off Switch in an upward direc-
tion to the SILENT symbol (
$
). The pager vibrates (if
equipped) and the lamp flashes for 4 seconds.
ON Mode: Slide the On/Off Switch in an upward direction
to the ON symbol (
#
). The pager emits an interrupted beep
and the lamp flashes for 4 seconds.
A full-segment display accompanies the power-up alert.
The display then changes to the standby screen.
Standby Screen in SILENT Mode
Standby Screen in ON Mode
888888888888
8:59a
D 8:59a
4
SETTING THE TIME
• To set the time, press
F
until
seTr Trime
is displayed,
then press
R
.
• The hours digits (represented by the grey characters in
the sample shown below) begin to blink.
Set the hours digits by pressing
R
until the correct hour
is displayed along with the appropriate
a
(for A.M.) or
p
(for P.M.) symbol. Keep pressing
R
to cycle through the
hours from A.M. to P.M. When the correct hour (A.M. or
P.M) is displayed, press
F
to adv ance to the minutes
digits.
• The first digit of the minutes (represented by the grey
character) begins to blink. Press
R
to change the first
digit of the minutes. Press
F
to advance to the second
digit of the minutes. Press
R
to change the second digit
of the minutes. Press
F
one more time to leave the time
setting function.
• All portions of the time of day screen, except the colon
(
:
), stop blinking. The time of day is now set and the
pager is in the standby mode.
12
:00a
8:
0
0a
