Motorola AT&T NVG589 Administrator'S Hanbook Download Page 71

Page: 71 / 216

Custom Services

To configure a Custom Service, click the

Add/Edit Services

button. The

Custom Services

page appears.

Enter the following information:

◆

Service Name:

A unique identifier for the Custom Service.

◆

Global Port Range:

Range of ports on which incoming traffic will be received.

◆

Base Host Port:

The port number at the start of the port range your Gateway should use when forwarding traf-

fic of the specified type(s) to the internal IP address.

◆

Protocol:

Protocol type of Internet traffic, TCP or UDP.

Once you define a Custom Service it becomes available in the

Application Hosting Entry Service

menu as one

of the services to select.

Click the

Add

button.

Summary of Contents for AT&T NVG589

























































































































































































































Search results

Summary of Contents for AT&T NVG589

Reviews:

Related manuals for AT&T NVG589

Brands by name

Popular brands

Motorola AT&T NVG589, Administrator'S Hanbook

Search results

Summary of Contents for AT&T NVG589

Reviews:

Related manuals for AT&T NVG589

Brands by name

Popular brands