manualshive.com logo in svg

Motorola AT&T NVG589, Administrator'S Hanbook, Page: 16 / 216

Share
Download
Motorola AT&T NVG589 Administrator'S Hanbook Download Page 16

Administrator’s Handbook

16

Battery Installation (optional)

The optional backup battery is located in a compartment on the bottom of the unit. Installing the battery door 
requires some care.

☛  

CAUTION

 – 

The battery used in this device may present a risk of  fire or chemical burn if  mis-
treated. Do not disassemble, heat above manufacturer’s maximum temperature 
limit, or incinerate. Replace battery with Motorola P/N 586185-001-00 only. Use of  
another battery may present a risk of  fire or explosion.

Dispose of  used battery promptly. Keep away from children. Do not disassemble 
and do not dispose of  in fire.

1.

Note the tab on the bottom of the battery.

2.

Insert the battery into the compartment on the bottom of the unit, as shown, and 
press into place so that the battery contacts seat securely in the unit.

3.

Then attach the compartment door. See 

“Battery Door Installation Instructions” on 

page 17

.

Summary of Contents for AT&T NVG589

























































































































































































































Reviews:

No comments