Motorola ASTRO 25 GTR 8000 Manual Download Page 146

Page: 146 / 309

4.4.5.3.1

Adding or Modifying an SNMPv3 User in CSS

When and where to use:

Use this procedure to create, update, or delete an SNMPv3 user from the

Configure SNMPv3 Users

window.

Procedure:

From the

Configure SNMPv3 Users

window, to add or modify the selected SNMPv3 user, click

one of the following:

•

Create:

Creates a user when the status is Not Present.

•

Update:

Updates an existing user.

•

Delete:

Removes an existing user.

Confirmation

dialog box appears and prompts if you want to continue.

Click

Yes

The

Processing Requests

dialog box appears and processes the request. A green square X

indicates OK and a red square X indicates failure.

After reviewing the processing status, click

NOTICE:

If you encounter any errors, go back to the appropriate step and correct the

information entered.

Repeat these steps for any SNMPv3 users you wish to create, update, or delete.

Click

Cancel

to exit the

Configure SNMPv3 Users

window.

The

Configure SNMPv3 Users

window closes, and the CSS main window returns.

4.4.5.3.2

Performing an SNMPv3 Connection Verification in CSS

When and where to use:

When the SNMPv3 user credentials have been created, modified, or

deleted, ensure that the device is properly configured for SNMPv3. Follow this procedure to verify the
SNMPv3 connection.

Procedure:

Connect to the device using Configuration/Service Software (CSS) through an Ethernet port link.
See

Connecting Through an Ethernet Port Link on page 140

When the passphrase prompt screen opens, select the configured security level and enter the
required passphrases.

If the connection was successful, click

4.4.5.4

Customizing the Login Banner in CSS

This procedure describes how to edit the login banner security notice.

Procedure:

Connect to the device using Configuration/Service Software (CSS) through an Ethernet port link.
See

Connecting Through an Ethernet Port Link on page 140

From the menu, select

Security

→

Device Security Configuration

→

Remote Access/Login

Banner (Ethernet)

MN003286A01-E
Chapter 4: GTR 8000 Base Radio Configuration

146

Summary of Contents for ASTRO 25 GTR 8000





















































































































































































































































































































Search results

Summary of Contents for ASTRO 25 GTR 8000

Reviews:

Motorola ASTRO 25 GTR 8000, Manual, Page: 146 / 309

Search results

Summary of Contents for ASTRO 25 GTR 8000

Reviews: