manualshive.com logo in svg

Motorola ASTRO 25 GTR 8000, Manual, Page: 143 / 309

Share
Download
Motorola ASTRO 25 GTR 8000 Manual Download Page 143

3

Enter the pairing number. Click 

OK

.

The pairing number is set.

4.4.5.2

Setting the Date and Time in CSS

This procedure provides the date and time to the device.

When and where to use: 

During installation, the date and time is set through an Ethernet cable

connected directly to the Ethernet port of the device. After installation, this procedure may be
performed remotely.

NOTICE: 

If a power outage occurs, the device does not retain the date and time settings.

Procedure:

1

Connect to the device using CSS through an Ethernet port link. See 

Connecting Through an

Ethernet Port Link on page 140

.

2

From the menu, select 

Tools 

→ 

Set Device Date and Time

.

3

Enter the current date and time. Click 

OK

.

The date and time are set.

4.4.5.3

Changing SNMPv3 Configuration and User Credentials in CSS

Prerequisites: 

Obtain the required SNMPv3 credentials information (Authentication passphrase,

Encryption passphrase, and Authoritative Engine ID) to configure the device before proceeding. The
user credentials information includes both the current and new credentials. Without the current
credentials, you cannot access the device and cannot change the user credentials. See 

Local

Password and SNMPv3 Passphrase Troubleshooting on page 218

. Changing to the incorrect user

credentials may lead to not being able to access the device from the Unified Network Configurator
(UNC), or for the device to be unable to send alarms to the Unified Event Manager (UEM) (for fault
management).

When and where to use: 

This procedure changes the SNMPv3 configuration and user credentials

from Configuration/Service Software (CSS) on a selected device in the site. For more information on
this feature, see the 

SNMPv3

 manual.

NOTICE: 

During installation, perform this procedure through an Ethernet cable connected

directly to the Ethernet port of the device. After installation, this procedure may be performed
remotely from CSS.

Procedure:

1

Connect to the device using CSS through an Ethernet port link. See 

Connecting Through an

Ethernet Port Link on page 140

.

2

From the menu, select 

Security 

→ 

SNMPv3 Configuration 

→ 

Configure SNMPv3 Users

(Ethernet)

.

The 

SNMPv3 Passphrase Prompt

 dialog box appears with 

MotoAdmin

 as the selected

SNMPv3 user.

3

In the 

SNMPv3 Passphrase Prompt

, enter the appropriate 

Authentication

 and 

Encryption

Passphrases

 in the text fields.

MN003286A01-E

Chapter 4:  GTR 8000 Base Radio Configuration

  143

Summary of Contents for ASTRO 25 GTR 8000






















































































































































































































































































































Reviews:

No comments