Motorola APX8500 Manual Download

Page: 68 / 273

NEXT >

< PREV

CONTENTS

GENERAL RADIO OPERATION

Receiving and Responding to a Radio Call

Once you have selected the required channel and/or zone, you can proceed to receive and respond to calls.

The radio shows different indicators based on the system the radio is configured.

•

The LED lights up solid red while the radio is transmitting.

•

In conventional mode, the LED lights up solid yellow when the radio is receiving a transmission.

•

In trunking mode, there is no LED indication when the radio receives a transmission.

•

If the radio is receiving a secure transmission, the LED blinks yellow.

LED Indicators

Red
Yellow
Green

Summary of Contents for APX8500


















































































































































































































































































Search results

Summary of Contents for APX8500

Reviews:

Related manuals for APX8500

Brands by name

Popular brands

Motorola APX8500, Manual

Search results

Summary of Contents for APX8500

Reviews:

Related manuals for APX8500

Brands by name

Popular brands