7.1.1
Managing the Scan List
Procedure:
1
From the
Home
screen, tap
Scan List
.
2
Tap
Scan List
or
Channels
.
3
Tap the required channel and perform one of the following options:
• To assign Priority-One status to the channel, select
Priority 1
.
• To assign Priority-Two status to the channel, select
Priority 2
.
• To remove priority from this channel, select
No Priority
.
• To remove the channel from the scan list, select
Remove from Scan
.
• To add the channel to the scan list, from the
Channels
tab, select
Add to Scan List
.
7.2
Scan
This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of
channels. Scanning is halted if you initiate a call and resumes when the call has ended.
7.2.1
Toggling the Scan Feature On and Off
Procedure:
Perform one of the following actions:
If…
Then…
To turn on Scan, turn the preprogrammed
2–Position Con-
centric
switch to the scan position.
a
From the
Home
screen, tap
Radio Quick Settings
.
b
To toggle the scan feature on and off, tap
Scan
.
7.2.2
Making a Dynamic Priority Change (Conventional Scan Only)
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any
channel in a scan list (except for the Priority-One channel) to the Priority-Two channel. This change
remains in effect until scan is turned off. Scan then reverts to the default setting.
Procedure:
From the
Home
screen, tap
.
MN005642A01-AN
Chapter 7 : General Radio Operation
44
