Motorola APX N50 User Manual Download Page 96

Page: 96 / 106

Chapter 29

Dynamic Zone Programming

Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.

NOTE:

Your radio must be preprogrammed for you to use this feature. At least one zone in the

radio must be a non-dynamic zone.

29.1

Selecting Channels in the Dynamic Zone

Procedure:

Enter a dynamic zone by performing the following actions:

Press the

Zone

menu item.

Select

<# Dynamic Zone Channels>

and press

Sel

# indicates the channel number on the 16-Position Switch that is numbered from 1 to 16.

Press the

ZnPr

menu item.

Press

Edit

→

List Selection

→

Sel

Scroll to the required zone and press

Sel

Scroll to the required channel and press

Sel

The display shows a positive notification and the channel is added to the Dynamic Zone.

29.2

Deleting Channels in the Dynamic Zone

Procedure:

Enter a dynamic zone by performing the following actions:

Press the

Zone

menu item.

Select

<# Dynamic Zone Channels>

and press

Sel

# indicates the channel number on the 16-Position Switch that is numbered from 1 to 16.

Press the

ZnPr

menu item.

Scroll to the required dynamic channel and press

Del

The Home screen shows

. If the deleted channel is the home channel,

the Home screen shows

<Zone Name>”Blank”

MN009203A01-AA
Chapter 29 : Dynamic Zone Programming

Summary of Contents for APX N50










































































































Search results

Summary of Contents for APX N50

Reviews:

Motorola APX N50, User Manual, Page: 96 / 106

Search results

Summary of Contents for APX N50

Reviews: