Motorola APX 6000 User Manual Download Page 139

Page: 139 / 200

Press the

PTT

button to talk, and release the

button to listen.

Out-of-Range Radio

When your radio goes out of the range of the system,
it can no longer lock onto a control channel.

You hear a low-pitched tone and/or the display shows
the currently selected zone/channel combination and

Out of range

. Your radio remains in this out-of-

range condition until it locks onto a control channel, it
locks onto a failsoft channel, or it is turned off.

Site Trunking Feature

If the zone controller loses communication with any
site, that site reverts to site trunking.

The display shows the currently selected zone/
channel combination and

Site trunking

Note:

When this occurs, you can communicate only

with other radios within your trunking site.

Locking and Unlocking a Site

This feature allows your radio to lock onto a specific
site and not roam among wide-area talkgroup sites.
This feature should be used with caution, since it

inhibits roaming to another site in a wide-area
system.

You can toggle the lock state between locked and
unlocked by pressing the preprogrammed

Site Lock/

Unlock

button.

Follow the following procedure to lock and unlock a
site via the radio menu.

or to

Site

Press the

Menu Select

button directly below

Site

Perform one of the following actions:

• To lock the site, press the

Menu Select

button

directly below

Lock

. The display shows

Site

locked

• To unlock the site, press the

Menu Select

button directly below

Unlk

. The display shows

Site unlocked

The radio saves the new site lock state and returns to
the Home screen.

Advanced Features

135

English

Summary of Contents for APX 6000









































































































































































































Search results

Summary of Contents for APX 6000

Reviews:

Related manuals for APX 6000

Brands by name

Popular brands

Motorola APX 6000, User Manual

Search results

Summary of Contents for APX 6000

Reviews:

Related manuals for APX 6000

Brands by name

Popular brands