•
or to select more list members whose scan status you want to change.
• Use the
16-Position Select
knob to select another scan list member.
5
Move the
Scan List Programming
switch out of programming position. Press
to exit scan
list programming and return to the Home screen.
6.4.5
Viewing and Changing the Priority Status
Procedure:
Perform one of the following actions:
• Press the
Menu Select
button directly below
Sel
one or more times to change the priority
status of the current displayed channel.
• Press the
Select
button one or more times to toggle between different status of the Scan List
status icon of the current displayed channel.
The radio shows one of following priority status icons and scenarios:
• A
Scan
icon indicates that the current channel is in the scan list as a non-priority channel.
The LED lights up solid green.
• A
Priority-One Channel Scan
icon indicates that the current channel is in the scan list as
the Priority-One channel. The LED rapidly blinks green. You hear all traffic on the Priority-
One channel, regardless of traffic on non-priority channels.
• A
Priority-Two Channel Scan
icon indicates that the current channel is in the scan list as
the Priority-Two channel. The LED blinks green.
• No icon indicates that the current channel is deleted from the scan list.
6.5
Scan
This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of
channels.
6.5.1
Turning Scan On or Off
Procedure:
Perform one of the following actions:
• Press the preprogrammed
Scan
button to toggle
Scan On
or
Scan Off
to initiate or stop
scan.
• Turn the preprogrammed
Scan
switch to the
Scan on
or
Scan off
position to initiate or stop
scan.
•
or to
Scan
and press the
Menu Select
button directly below
Scan
.
If the scan is enabled, the display shows
Scan on
and the scan status icon.
If the scan is disabled, the display shows
Scan Off
.
The radio returns to the Home screen.
MN004476A01-AE
Chapter 6: Advanced Features
61
