The display shows momentary
Radio ID off
, and
the radio alias disappears from the Home screen or
the display shows momentary
Radio ID on
, and the
radio alias appears on the Home screen.
Selecting the Audio Speaker
Your radio must be preprogrammed to allow you to
use this feature.
This feature allows you to select the speaker route for
the radio's audio from either the main or the
secondary speaker using the radio profile settings.
While both speakers function together with the
secondary speaker enhancing intelligibility of the
received audio during typical radio operation, each
speaker has an independently-tuned frequency
response and volume level operation.
The secondary speaker also has a "whisper" mode
with a modified volume taper for quieter modes of
operation.
Note:
If an external speaker or microphone accessory
is attached to the radio, neither internal speaker is
operational as audio is routed to the accessory.
The following methods are options on how to select
the audio speaker. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
•
Select the audio speaker via the preprogrammed
Profile
button:
a) Press the preprogrammed
Profile
button.
b)
or
to scroll through the menu
selections.
c) Press the
Menu Select
button directly below
Sel
to select the radio profile with the required
speaker routing or press the
Menu Select
button directly below
Exit
to exit the screen
without making any changes.
The radio returns to the Home screen. The
profile name on the Home screen indicates the
current selected radio profile.
•
Select the audio speaker via the radio menu
Prfl
:
a)
or to
Prfl
.
b) To access the
Profiles
feature screen, press
the
Menu Select
button directly below
Prfl
.
c)
or
to scroll through the menu
selections.
d) Press the
Menu Select
button directly below
Sel
to select the radio profile with the required
Advanced Features
140
English
