manualshive.com logo in svg

Motorola APX 1000i 2, User Manual

Share
Download
Motorola APX 1000i 2 User Manual Download Page 61

6.11

Sending Evacuation Tone

This feature enables the evacuation tone to be heard on the transmitting radio and on any radio that is
able to receive the tone instruction.

Procedure:

Once the tone begins to sound, if the orange button is released the tone continues to alarm on all
radios within the talkgroup, until the 

PTT

 button is released.

NOTICE: 

Radio does not transmit evacuation tone if the radio is in secure mode.

6.12

Automatic Registration Service

Automatic Registration Service (ARS) provides an automated data application registration for the radio.
When you turn on the radio, the device automatically registers with the server. Data applications within
the fixed network determine the presence of a device on the system and send data to the device.

The ARS for the radio consists of two modes:

• ARS Server Mode (default mode)

• ARS Non-server Mode

6.12.1

Selecting or Changing the ARS Mode

When and where to use:

The following methods are options on how to select or change the ARS Mode. The result of all the
methods is the same. You can use the options interchangeably depending on your preference and the
programmed functions.

Procedure:

• Selecting or Changing the ARS mode using the 

16-Position Select

 knob:

a. Once the zone you want is displayed, turn the preprogrammed 

16-Position Select

 knob to

the desired mode.

• Selecting or Changing the ARS mode using the radio menu:

a.

 or   to 

Chan

 .

b. Press the 

Menu Select

 button directly below 

Chan

 .

The display shows the current channel name.

c.

 or 

 to the required channel or mode.

d. Press 

Sel

 to confirm the displayed channel.

One of the following scenarios occur:

• In ARS Server Mode, the display shows the zone and ARS server channel.

• In ARS Non-Server Mode, the display shows the zone and ARS non-server channel.

• If the channel or mode selected is unprogrammed, the display shows 

Unprogrammed

.

MN003110A01-AJ

Chapter 6:  Advanced Features

  61

Summary of Contents for APX 1000i 2































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands