Motorola 7528X User Manual Download Page 163

Page: 163 / 210

Settings

4 - 69

•

End Task:

To shut down an application,

highlight the program

in the list, and tap on the

End Task

softkey in the softkey bar at the bottom of the screen.

Task Manager Menu

The

Task Manager menu

provides additional options to help you manage your applications.

•

Tap on the

Menu

softkey at the bottom of the screen.

•

Switch To:

Makes the highlighted application active.

•

End All Tasks:

Shuts down all applications listed.

•

View:

Allows you to list either all running applications or all processes.

•

Sort By:

Allows you to sort active applications or processes based on Memory size, CPU or application or

process Name.

•

Refresh:

Updates the list of applications or processes.

•

Exit:

Closes the Task Manager.

Total Recall

Total Recall

is a Psion utility developed to maintain applications and settings during a cold boot, as well as

clone settings to other devices. This utility creates a restore point of a device at a known state. This can be
used as a backup of the device (the administrator can clean the terminal and restore the profile at any time),

Draft #6

Summary of Contents for 7528X



















































































































































































































Search results

Summary of Contents for 7528X

Reviews:

Related manuals for 7528X

Brands by name

Popular brands

Motorola 7528X, User Manual

Search results

Summary of Contents for 7528X

Reviews:

Related manuals for 7528X

Brands by name

Popular brands