Motorola 7528X, User Manual

Page: 136 / 210

4 - 42 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
• Tap on the Add/Edit button.
• Highlight a value in the Unicode mapping list.
• Position the cursor in the Unicode Mapping field, and type a Unicode value for the highlighted key.
Removing Unicode Values
• In the Unicode Mapping tab, highlight the item you want to delete, and tap on the Remove button.
Scancode Remapping
A scancode is a number that is associated with a physical key on a keyboard. Every key has a unique scan-
code that is mapped to a virtual key, a function, or a macro. Scancode Remapping allows you to change the
functionality of any key on the keyboard. A key can be remapped to send a virtual key (e.g. VK_F represents
the ‘F’ key; VK_RETURN represents the [ENTER] key, etc.), perform a function (e.g. turn the scanner on,
change volume/contrast, etc.) or run a macro.
There are four different tables of scancode mappings: the Normal table, the Orange table, the Blue table and
the Shift table. The Normal table defines unmodified key presses; the
Blue table defines key presses that occur
when the [FN/BLUE] modifier is on; the Orange table defines key presses that occur when the [FN/ORANGE]
modifier is on; the Shift table defines key presses that occur when the [SHIFT] modifier is on. The default
mappings of these scancodes can be overwritten for each of these four tables using Scancode Remapping .
The first column in the Scancode Remapping tab displays the scancodes in hexadecimal. If the scancode is
remapped to a virtual key, that virtual key is displayed in the column labelled V-Key . In the column labelled
Function , virtual keys that are ‘Shifted’ or ‘Unshifted’ are displayed.
NOTE
To add a shifted state – [SHIFT] and/or [CTRL], tap on the checkbox next to ‘SHIFT
Pressed’ and/or ‘CTRL Pressed’.
Draft #6