manualshive.com logo in svg

Motorola 7528X, User Manual, Page: 107 / 210

Share
Download
Motorola 7528X User Manual Download Page 107

Settings

4 - 13

Notifications Tab

This tab allows you to choose an event, and for each event, choose the audio notification or sound that the 
Workabout Pro4 will emit for that event. For example, suppose you choose 

Wireless network detected

 from the 

Event: 

drop-down menu. If you check 

Play sound

, the unit will emit an audible sound when a network is 

detected. You can also choose a number of associated options to tailor this option to your needs. 

•

Choose an event from the 

Events

 drop-down menu.

•

Choose the relevant options for the 

Event

 you’ve chosen.

•

To test your choice, tap on the arrow in the dialog box. 

Connections Folder

This folder icon contains the applets you’ll need to set up connections using 

Bluetooth

 and an 802.11 radio.

•

Tap  on 

Start>Settings>Connections folder

 icon.

Beam

Enabling the 

Beam

 applet makes your Workabout Pro4 visible and available to others wanting to beam infor-

mation to your unit.

Tap here to play
 your ring choices

Tap here to end
 the ring test

Draft #6

Summary of Contents for 7528X



















































































































































































































Reviews:

No comments