manualshive.com logo in svg

Motorola 7528X, User Manual, Page: 100 / 210

Share
Download
Motorola 7528X User Manual Download Page 100

4 - 6

Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual

Clocks & Alarms

Refer to 

“Time, Date and Alarms” on page 2-17

 for details about this applet.

Lock

This option allows you to assign a password to protect access to your phone service.

•

Tap  on 

Start>Settings

, and then tap on the 

Lock

 icon.

It is critical that you store your password in a safe place. If you forget it, a ‘clean start’ must be performed by 
certified personnel. A clean start returns the Workabout Pro4 to factory settings. Only the data stored in a CF or 
SD memory card are preserved.

•

Tap in the checkbox next to 

Prompt if phone unused for

 to turn on password protection for your 

phone service. 

•

Choose the amount of time that the unit can remain idle before you are prompted to enter your password.

•

In the 

Password

 type drop-down menu, choose the type of password you prefer to assign. 

Simple PIN

 

allows you to enter a minimum of four numeric characters. 

Strong alphanumeric

 requires a minimum of 7 

characters and must contain at least three of the following: uppercase and lowercase alpha characters, 
numbers and punctuation.

•

Type your password in the 

Password

 field.

•

Retype your password in the 

Confirm

 field.

•

Tap  on 

OK

. A dialog box asks whether or not you want to save your password settings. Tap on 

YES

 to 

save your password assignment.

Home

The 

Home

 applet is used to customize your 

Today

 screen.

•

Tap  on 

Start>Home

 icon to display this applet.

Draft #6

Summary of Contents for 7528X



















































































































































































































Reviews:

No comments