Sarix® Multi Pro Camera Installation Manual
C6715M | 01/24/22
60
1. Locate and make note of the MAC Address (MAC) listed on the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following commands:
a.
arp -s
<New Camera IP Address> <Camera MAC Address>
For example:
arp -s 192.168.1.10 00-18-85-12-45-78
b.
ping -l 123 -t
<New Camera IP Address>
For example:
ping -l 123 -t 192.168.1.10
3. Reboot the camera.
4. Close the Command Prompt window when you see the following message:
Reply from
<New Camera IP Address>
: ...
Cleaning
Dome Bubble
If the video image becomes blurry or smudged in areas, it may be because the dome bubble requires
cleaning.
To clean the dome bubble:
l
Use hand soap or a non-abrasive detergent to wash off dirt or fingerprints.
l
Use a microfiber cloth or non-abrasive fabric to dry the dome bubble.
Important:
Failure to use the recommended cleaning materials may result in a damaged or scratched dome
bubble. A damaged dome bubble may negatively impact image quality and cause unwanted IR light
reflecting into the lens.
Body
l
Use a dry or lightly dampened cloth to clean the camera body.
l
Do not use strong or abrasive detergents.
