Sarix® Multi Pro Camera Installation Manual
C6715M | 01/24/22
16
Pendant Mount Installation
Required Tools and Materials
The following tools are required to complete the installation but are not included in the package:
If you will be installing the NPT adapter (NPTA-1001), you will need:
l
1-1/2" NPT female to female adapter
l
NPT pipe
Camera Package Contents
The Sarix Multi Pro camera has a variety of different mounting, dome cover, camera and accessory
options. The components for each Sarix Multi Pro camera will arrive in a camera package, a dome cover
package, a mounting adapter package, a mount package (for pendant mount cameras), and a metal ceiling
panel package (for in-ceiling cameras).
Ensure the camera package contains the following:
l
Pelco Sarix Multi Pro Camera module. A 3- or 4-sensor camera module with 3 MP, 5 MP, or 4K (8
MP) resolution per sensor.
l
Audio, external power, and I/O pigtail cable connector
l
RJ45 CAT5E plugs (x2)
l
RJ45 connector waterproof gland
Ensure the Pendant mount adapter package contains the following:
l
Pendant mount adapter (IMD1-PMT)
l
Installation instructions sheet
If you are installing the camera with the pendant wall mount, ensure the package includes the following:
l
Pendant wall mount (WLMT-1001)
l
Mounting template sticker
If you are installing the camera with the NPT mount, ensure the package includes the following:
l
NPT mount (NPTA-1001)
l
Lock nut
l
Thread sealing tape
Ensure the dome cover package contains the following:
l
Clear or smoked dome bubble and cover (IMD1-INCLD1 or IMD1-SPLD0)
If you are installing the camera with the optional IR illuminator, ensure the package includes the following:
l
IR illuminator ring (IMD1-IR)
Pendant Mount Installation Steps
Complete the following sections to install the device.
(Optional) Installing the Pendant Wall Mount
Use the procedure below to install the pendant wall mount (WLMT-1001) for use with the Sarix Multi Pro
pendant mount adapter (IMD1-PMT).
