Version 1.5
© Openpath 2021
12
7. Tap on the ACU Name that you want to provision to (this is the
name of the SDC you created in the Control Center), then tap
Yes
to proceed
8. The Status LED will
blink yellow
; the app will send notifications
when the SDC provision state changes from
Unprovisioned
to
Provisioning in progress
to
Provisioning complete
9. When setup is complete, the Status LED will change to
solid white
Troubleshooting the SDC
If at any point the Status LED
blinks red
, this indicates there is an issue
connecting to the Internet. If attempting to set up using Wi-Fi, try
switching to an Ethernet connection.
Refer to
If at any point the Status LED is
solid red
, this indicates the SDC is in an
error state. Go to the Hardware Dashboard in the Control Center and
restart the services listed under Remote Diagnostics. If this doesn't
work, power cycle the SDC (remove power, wait 10 seconds, apply
power). If the error persists, contact Openpath support.
