Motorola solutions MCC 7100 IP, Setup And User Manual

Page: 51 / 170

found by running a Windows command prompt and entering
ipconfig /all
from the target
computer.
IMPORTANT: The MAC address selected in this step must be the address associated
with a permanent network adapter on the server. The licensing services could be
adversely affected by choosing a network adapter that is frequently enabled or disabled.
6 Enter the fulfillment count.
NOTICE:
The fulfillment count is the number of licensed audio streams for the MCC 7100
IP Dispatch Console. The number of allowable audio streams is associated with the
license and available in 5, 10, 15, or 20 streams.
7 After you review the license information, generate the license files and complete the process.
8 Manage the licenses and either save the license files to the computer or send them in an E-mail.
You use the license files when prompted during the installation of the MCC 7100 IP Dispatch
Console software.
Network Interface Card Configuration
Modify the configuration of the Network Interface Card (NIC) on the computer to support the console
proxy.
NOTICE: The IP address of the console computer affects SNMPv3 functionality. Modifying the
IP address of the console computer for any reason after its initial setting may require SNMPv3
user credentials on the computer be reset. See the
SNMPv3 manual for details.
Configuring the Network Interface Card for an MCC 7100 IP Dispatch
Console Inside the ASTRO RNI
Configure the Network Interface Card (NIC) on the computer or server running the MCC 7100 IP
Dispatch Console software inside the ASTRO
®
25 Radio Network Infrastructure (RNI).
The NIC enables communication of an MCC 7100 IP Dispatch Console inside the ASTRO
®
25 RNI.
The configuration of the NIC is required only for new installations and as part of the disaster recovery
process.
NOTICE:
This procedure is intended as a guide and may not reflect recent updates to the
Windows 7 operating system. See the relevant Microsoft operating system documentation or
the computer manufacturer documentation for specific help on how to configure the NIC.
Prerequisites: Acquire the following Domain Name Service (DNS) network settings:
• List of DNS server IP addresses
• List of DNS suffixes
• An Ethernet network cable
NOTICE: See the system configuration documentation (provided by Motorola) for the correct
network settings and relevant lists of DNS server IP addresses and DNS suffixes, otherwise
contact Motorola Solution Support Center (SSC) for assistance.
NOTICE: In Windows 7, the Local Area Connection icon in Managed Network Connections may
indicate that the network connection is partially available (yellow triangle with an exclamation
mark) even though there is network connectivity to the ASTRO
®
25 RNI. This icon may indicate
partial availability when there is no connection from the ASTRO
®
25 RNI to the external internet,
which is a typical system configuration.
Procedure:
1
Log on to the Windows 7operating system as an administrator.
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
Send Feedback 51