Motorola solutions MCC 7100 IP, Setup And User Manual

Page: 127 / 170

4
Modify the
Host Name
or
IP Address
of the remote MCC 7100 IP Dispatch Console.
IMPORTANT: This IP address must be the ASTRO
®
25 Radio Network Infrastructure
(RNI) IP address for the connecting remote dispatch console and not the Customer
Enterprise Network (CEN) IP address.
5 Click Save .
Removing a Remote MCC 7100 IP Dispatch Console from the Black List
Procedure:
1
From the Windows
Start
menu, select
All Programs
→
Motorola
→
PRXY 7000
→
Console
Status .
2
Click the
Remote OP Connection Black List
tab.
3 Select the remote MCC 7100 IP Dispatch Console and click Remove .
4 Click Save .
MCC 7100 Peripheral Configuration Tool
Use the Peripheral Configuration Tool to configure the audio input and audio output devices used by
the MCC 7100 IP Dispatch Console. When launched, the tool reads all audio devices connected to the
dispatch console.
Launch the Peripheral Configuration Tool from the
Start
menu of the Windows operating system by
selecting All Programs → Motorola → MCC 7100 Dispatch → Peripheral Configuration Tool .
MN000672A01-E
Chapter 5: Console Dispatch Status and Peripheral Configuration Tool
Send Feedback 127